Control Hub

  • If you update the first and last name field for a user in Control Hub, through a CSV or API, and leave the first name or last name blank, then the name saves in Control Hub. However, the name appears in the Cisco IP phones with a period (".") in the first name and the last name fields.

  • Коли ви оновлюєте ім 'я або прізвище користувача в Центрі керування, оновлення не здійснюється у відповідних полях ідентифікатора абонента.

    Workaround: Змініть ім 'я користувача в Control Hub, а потім оновіть ім' я та прізвище викликача в Control Hub.

  • Коли ви створюєте місцезнаходження та призначаєте номер, який вже використовується, місцезнаходження все одно створюється, але відображається як не налаштоване в Центрі керування.

  • Ви можете ввести спеціальні символи в полях Ім 'я та Прізвище для функції ідентифікатора абонента в Control Hub, але ці символи будуть нормалізовані та видалені з екрана дисплея телефону, коли користувач здійснює дзвінок.

  • If you add a workspace and don’t add a Webex Room Device, then the option to add a desk phone doesn’t appear.

    Workaround: Recreate the workspace and associate the desk phone device.

  • You can’t remove the last number from an organization.

    Workaround: Add a new temporary number to the organization, to unassign and remove the last number.

  • If an executive is already assigned with executive assistants from locations that are not pertaining to the location administrator assigned locations, then the location admin:

    • Can’t add new executive assistants to that particular executive.

    • Can’t delete individual executive assistants. However, 'Delete all' works.

Emergency Callback Number

  • In Control Hub, you can deactivate a user or workspace. However, the deactivation feature isn’t currently functioning. When deactivating a user or workspace, if the user or workspace is actively used as the Emergency Callback Number (ECBN), a message appears to warn the administrator. Currently, you can ignore this warning since the deactivation doesn’t actually occur.

  • When the Assigned Number from User’s Location is selected, the Emergency Callback Number (ECBN) selects a fallback destination. Ім 'я та номер, що відображаються у спадному списку, є ефективним користувачем. It’s not the originally configured user. Це обмеження є косметичним, але вводить в оману, і воно буде вирішене.

Bulk delete phone numbers

If attempting to delete the bulk range of numbers, Control Hub prompts to delete the entire range if only one record of that range is selected. If more than one number in that range is selected, then the bulk delete of this number range fails.

Webex Calling analytics

  • Analog telephone adapters (ATAs) and DECT devices aren’t supported.

  • Devices that register through IPv6 or a VPN termination to Webex Calling are also unsupported.

Business Texting

  • Few numbers may not have texting capability (carrier limitation), so the customer must contact TAC to investigate it further.

  • All the pending port orders before General Availability for business texting won’t have automatic texting capability when porting completes. Contact TAC if you have issues. The backend team can run an audit script for each customer to fix the issue.

  • For outgoing messages, there's a limitation of six messages per minute from each number. Delay in delivery of the messages can be one of the cause for slowness.

  • Bulk Provision for business texting isn’t working accurately. Provision business texting at the user or organization level, to enable bulk provisioning.

Duplicate calling location names

The new location centralization feature provides a unified view of locations across calling and workspaces. Existing workspace locations and calling locations are migrated to a single location for both workspaces and calling. This feature may introduce several duplicate names of locations.

There’s no functional impact for this issue. For example, the admin might see Location1 and Location1-CALL in the list of locations.

Обхідний шлях

You can’t bulk-delete the duplicate locations. A CSV capability will be introduced shortly.

Користувацький портал Calling

  • When Don’t Disturb is enabled from the Calling User Portal, callers hear the busy treatment. Currently, in the portal, the description says that it sends callers to voicemail, when enabled. To send callers to voicemail, enable When busy in the Voicemail Settings of the Calling User Portal.

Local Gateway configuration

  • The Fax-to-Email feature in Webex Calling requires the T.38 protocol when used through the local gateway (CUBE) for instance FAX to Personal Fax number > PSTN > CUBE > Webex Calling SBC > EMAIL. У цьому випадку передача медіа не буде зашифрована. Тому ввімкніть протокол T.38 на власний розсуд.

Пристрої Webex Calling

  • Busy Lamp Field (BLF) doesn't display in secondary devices (shared call appearance). Наразі BLF відображається лише для основних пристроїв.

  • When deactivating a user, Calling services are unavailable for the Webex App. Cisco MPP phones continue to support Calling until you either remove the device or enable call intercept for that user. For more information about the call intercept, see Configure Call Intercept for a User for Webex Calling in Cisco Control Hub.

  • ATA 191/192 -While onboarding Cisco ATA 191/192 devices, you may experience a problem when attempting a remote firmware upgrade on the ATA with an older firmware version. To resolve the issue, manually upgrade the firmware on your Cisco ATA 191/192.

    Обхідний шлях: Go to Administration > Firmware Upgrade. Розпакуйте файл. Виберіть розпакований файл, щоб оновити його. Download the firmware from here. After downloading the firmware, point the ATA to https://cisco.sipflash.com/.

  • Your MPP device can’t access any Active Directory (AD) that was synchronized by the Cisco Directory Connector. У меню "Користувацький каталог" ваш телефон MPP може отримувати доступ лише до тих користувачів, яким було призначено ліцензії Webex Calling.

  • When applying an MPP Line Key Template to a phone, the Virtual Lines assigned to the device may not appear after Apply Changes even though the template includes several Configure Lines positions on line keys. However, switching the phone back to Default Layout mode results in applying the Virtual Lines as expected.

Користувачі Webex Carrier

Currently, Webex Calling and Webex Carrier share a common identity across systems that doesn't allow provisioning the same user in both environments. Any Webex Calling customer with an email address identifier for Webex Carrier can't on board to Webex Calling with the same email address identifier.